Operating the Instrument
R&S
®
ESW
62
Getting Started 1328.4922.02 ─ 06
Trace Mode
Abbreviation of the trace mode:
●
Clrw
Clear Write: Shows the currently measured values.
●
Max
Max Hold: Shows the maximum values that have been measured.
●
Min
Min Hold: Shows the minimum values that have been measured.
●
Average
Average: Shows the averaged values that have been measured.
●
View
View: Shows a trace which remains the same when you perform
another measurement.
●
Transducer
Transducer: Shows the correction values of active transducer fac-
tors.
Norm/NCor
Correction data is not used.
6.1.3
Marker Information
Marker information is provided either in the diagram grid or in a separate marker
table, depending on the configuration.
Marker information in diagram grid
Within the diagram grid, the x-axis and y-axis positions of the last 2 markers or
delta markers that were set are displayed, if available, as well as their index. The
value in the square brackets after the index indicates the trace to which the
marker is assigned. (Example: M2[1] defines marker 2 on trace 1.) For more than
2 markers, a separate marker table is displayed beneath the diagram by default.
Marker information in marker table
In addition to the marker information displayed within the diagram grid, a separate
marker table can be displayed beneath the diagram. This table provides the fol-
lowing information for all active markers:
Label
Information
"Wnd"
Window type the marker is positioned in.
"Type"
Marker type: N (normal), D (delta), T (temporary, internal)
"Ref"
Reference (for delta markers)
"Trc"
Trace to which the marker is assigned
Understanding the Display Information