R&S ESR Series, Руководство пользователя

Страница: 392 / 1126

Spectrum Measurements
R&S
®
ESR
389 User Manual 1175.7068.02 ─ 12
Functions to configure traces exclusive in Spectrum mode
Trace 1/Trace 2/Trace 3/Trace 4/Trace 5/Trace 6 .......................................................389
└ Clear Write .................................................................................................... 389
└ Max Hold .......................................................................................................390
└ Min Hold ........................................................................................................390
└ Average .........................................................................................................390
└ View .............................................................................................................. 390
└ Blank .............................................................................................................390
└ Hold/Cont ...................................................................................................... 391
└ Detector ........................................................................................................ 391
└ Auto Select ......................................................................................... 391
└ Auto Peak ........................................................................................... 392
└ Positive Peak ...................................................................................... 392
└ Negative Peak .................................................................................... 392
└ Sample ................................................................................................392
└ RMS ....................................................................................................392
└ Average .............................................................................................. 392
└ Quasipeak ...........................................................................................392
└ CISPR Average .................................................................................. 392
└ RMS Average ..................................................................................... 393
Average Mode .............................................................................................................393
└ Lin ................................................................................................................. 393
└ Log ................................................................................................................393
└ Power ............................................................................................................394
Trace Math .................................................................................................................. 394
Trace Math Mode ........................................................................................................ 394
└ Lin ................................................................................................................. 394
└ Log ................................................................................................................395
└ Power ............................................................................................................395
Trace Math Position .................................................................................................... 395
Trace Math Off ............................................................................................................ 395
Trace 1/Trace 2/Trace 3/Trace 4/Trace 5/Trace 6
Selects the active trace (1, 2, 3, 4, 5, 6) and opens the "Trace Mode" submenu for the
selected trace.
In the default state, trace 1 is in Clear Write mode. The other traces are turned off. For
details see Chapter 5.2.3, "Trace Modes" , on page 171.
Tip: To configure several traces in one step, use the functionality of the Trace Configu-
ration dialog box. To access the dialog box, press the Trace Wizard softkey.
Remote command:
Selected via numeric suffix of:
TRACe<1...6>
commands
Clear Write ← Trace 1/Trace 2/Trace 3/Trace 4/Trace 5/Trace 6
Overwrite mode: the trace is overwritten by each sweep. This is the default setting.
All available detectors can be selected.
Remote command:
DISP:TRAC:MODE WRIT
, see
DISPlay[:WINDow<n>]:TRACe<t>:MODE
on page 683
Analysis