Running an EMI Band Evaluation Test
01.00
Rohde & Schwarz
EMI Automotive Band Evaluation with R&S©EMC32-K51
– 1SP07-
25
4
Running an EMI Band Evaluation Test
As usual for EMC32 there are several ways to start a new test.
Figure 28: Several possibilities to start a new test directly or via the new test
editor
The New Test Editor gives additional freedom to change parameters of the Test
Template for one test (Figure 30).
Any setting regarding report setup or EUT Information file is no longer taken from the
settings in the template but from the New Test Editor.
Figure 29: Start a new test choosing the Test Mode: EMI Automotive and an
appropriate Test Template in the New Test Editor