LTE Multi Evaluation Measurement
R&S
®
CMW-KM5xx/-KS5xx
631
User Manual 1173.9628.02 ─ 16
Parameters:
<RMS>
Range:
0 % to 100 %
*RST:
17.5 %, ON
Default unit: %
Additional parameters: OFF | ON (disables the limit check | ena-
bles the limit check using the previous/default limit values)
<Peak>
Range:
0 % to 100 %
*RST:
35 %, OFF
Default unit: %
Additional parameters: OFF | ON (disables the limit check | ena-
bles the limit check using the previous/default limit values)
Example:
See
Firmware/Software:
V1.0.10.1
CONFigure:LTE:MEAS<i>:MEValuation:LIMit:QPSK:MERRor
<RMS>, <Peak>
Defines upper limits for the RMS and peak values of the magnitude error for QPSK.
Parameters:
<RMS>
Range:
0 % to 100 %
*RST:
17.5 %, OFF
Default unit: %
Additional parameters: OFF | ON (disables the limit check | ena-
bles the limit check using the previous/default limit values)
<Peak>
Range:
0 % to 100 %
*RST:
35 %, OFF
Default unit: %
Additional parameters: OFF | ON (disables the limit check | ena-
bles the limit check using the previous/default limit values)
Example:
See
Firmware/Software:
V1.0.10.1
CONFigure:LTE:MEAS<i>:MEValuation:LIMit:QPSK:PERRor
<RMS>, <Peak>
Defines symmetric limits for the RMS and peak values of the phase error for QPSK.
The limit check fails if the absolute value of the measured phase error exceeds the
specified values.
Parameters:
<RMS>
Range:
0 deg to 180 deg
*RST:
17.5 deg, OFF
Default unit: deg
Additional parameters: OFF | ON (disables the limit check | ena-
bles the limit check using the previous/default limit values)
Command Reference
深圳德标仪器
135-1095-0799