LTE Multi Evaluation Measurement
R&S
®
CMW-KM5xx/-KS5xx
599
User Manual 1173.9628.02 ─ 16
<TXMeasurement>
OFF | ON
TX Measurement Statistical Overview
*RST:
ON
<SpecEmMask>
OFF | ON
Spectrum Emission Mask
*RST:
ON
<ACLR>
OFF | ON
Adjacent Channel Leakage Power Ratio
*RST:
ON
<RBAllocTable>
OFF | ON
Resource Block Allocation Table
*RST:
OFF
<PowerMonitor>
OFF | ON
Power Monitor
*RST:
OFF
<BLER>
OFF | ON
Block Error Ratio
*RST:
OFF
<PowerDynamics>
OFF | ON
Power Dynamics
*RST:
OFF
Example:
See
Performing Single-Shot Measurements
Firmware/Software:
V1.0.10.1
V1.0.15.20: added <RBAllocTable>, <PowerMonitor>
V1.0.15.21: added <BLER>
V2.0.10: added <PowerDynamics>
Manual operation:
See
"Multi Evaluation > Assign Views"
CONFigure:LTE:MEAS<i>:MEValuation:RESult:EVMagnitude
<Enable>
CONFigure:LTE:MEAS<i>:MEValuation:RESult:MERRor
<Enable>
CONFigure:LTE:MEAS<i>:MEValuation:RESult:PERRor
<Enable>
CONFigure:LTE:MEAS<i>:MEValuation:RESult:IEMissions
<Enable>
CONFigure:LTE:MEAS<i>:MEValuation:RESult:EVMC
<Enable>
CONFigure:LTE:MEAS<i>:MEValuation:RESult:IQ
<Enable>
CONFigure:LTE:MEAS<i>:MEValuation:RESult:ESFLatness
<Enable>
CONFigure:LTE:MEAS<i>:MEValuation:RESult:TXM
<Enable>
CONFigure:LTE:MEAS<i>:MEValuation:RESult:SEMask
<Enable>
CONFigure:LTE:MEAS<i>:MEValuation:RESult:ACLR
<Enable>
CONFigure:LTE:MEAS<i>:MEValuation:RESult:RBATable
<Enable>
CONFigure:LTE:MEAS<i>:MEValuation:RESult:PMONitor
<Enable>
Command Reference
135-1095-0799