LTE Signaling
R&S
®
CMW-KM5xx/-KS5xx
394
User Manual 1173.9628.02 ─ 16
CONFigure:LTE:SIGN<i>:CONNection:CTYPe
<Type>
Selects the connection type to be applied.
Parameters:
<Type>
TESTmode | DAPPlication
TESTmode
: for signaling tests not involving the DAU
DAPPlication
: for data application measurements using the
DAU
*RST:
TEST
Example:
See
Configuring General Connection Settings
Firmware/Software:
V2.0.20
Options:
For DAPPlication: installed DAU with R&S CMW-KM050 or
external DAU
Manual operation:
See
CONFigure:LTE:SIGN<i>:CONNection:EDAU:ENABle
<Enable>
Enables usage of an external DAU.
Parameters:
<Enable>
OFF | ON
*RST:
OFF
Example:
See
Configuring General Connection Settings
Firmware/Software:
V3.2.80
Options:
R&S CMW-KA120
Manual operation:
See
CONFigure:LTE:SIGN<i>:CONNection:EDAU:NSEGment
<NetworkSegment>
Specifies the network segment of the instrument where the external DAU is installed.
Parameters:
<NetworkSegment> A | B | C
*RST:
A
Example:
See
Configuring General Connection Settings
Firmware/Software:
V3.2.80
Options:
R&S CMW-KA120
Manual operation:
See
"Network Segment, Subnet Node ID"
CONFigure:LTE:SIGN<i>:CONNection:EDAU:NID
<ID>
Specifies the subnet node ID of the instrument where the external DAU is installed.
Command Reference
深圳德标仪器
135-1095-0799