LTE Signaling
R&S
®
CMW-KM5xx/-KS5xx
364
User Manual 1173.9628.02 ─ 16
Parameters:
<Enable>
OFF | ON
*RST:
OFF
Example:
See
Configuring Physical Cell Setup
Firmware/Software:
V3.2.60
Options:
R&S CMW-KS510
Manual operation:
See
CONFigure:LTE:SIGN<i>:CELL:SRS:SFConfig
<Subframe>
Specify the "srs-SubframeConfig" value.
The setting is only used if manual configuration is enabled, see
.
Parameters:
<Subframe>
Range:
0 to 15
*RST:
3
Example:
See
Configuring Physical Cell Setup
Firmware/Software:
V3.2.60
Options:
R&S CMW-KS510
Manual operation:
See
CONFigure:LTE:SIGN<i>:CELL:SRS:SCINdex:FDD
<Index>
Specify the "srs-ConfigIndex" value for FDD.
The setting is only used if manual configuration is enabled, see
.
Parameters:
<Index>
Range:
0 to 636
*RST:
7
Example:
See
Configuring Physical Cell Setup
Firmware/Software:
V3.2.70
Options:
R&S CMW-KS510
Manual operation:
See
CONFigure:LTE:SIGN<i>:CELL:SRS:SCINdex:TDD
<Index>
Specify the "srs-ConfigIndex" value for TDD.
The setting is only used if manual configuration is enabled, see
.
Command Reference
深圳德标仪器