R&S
®
AREG800A
Firmware update
Release Notes 1437.4445.00 - 02
9
●
ISO image for firmware update
AREG800A_5.00.057.63.iso
Please contact the service department to get this file!
Hardware:
●
External
USB CD or DVD ROM burner with USB cable.
●
1 CD Recordable.
●
PC with burn program that can burn ISO images onto CD.
About ISO image
This is a standardized file format for creating CD images. A CD image is a single file
encapsulating the whole data of a CD including directories and files. Unpacking the
image to a CD restores the original data. Almost any CD burning program is able to
write CDs based on ISO images.
3.5.2.2 Update procedure
Burn ISO image onto a CD
On most computers, burning an ISO image can be initiated by simply double clicking
the ISO image file. If this is not the case, the manual procedure is similar to the
following instructions. Nero Burning ROM (StartSmart) is used in this example.
●
Connect the external USB CD/DVD drive to the PC
●
Insert a recordable CD
●
Start Nero StartSmart
●
Select medium „CD“
●
Select „Create Data CD“
●
From the
Files menu
, open file
AREG800A_5.00.057.63.iso
●
Click "Burn"
●
When finished, close Nero and disconnect external USB CD/DVD drive
Install new firmware on R&S®AREG800A
●
Instrument must be switched off
●
Connect the external USB CD/DVD drive to the R&S®AREG800A
●
Switch on Instrument
●
The instrument boots from external drive
●
Follow the instructions on screen
●
Disconnect the external USB device
●
Reboot instrument
●
Execute internal adjustments, if indicated
