Troubleshooting
R&S
®
NRX
483
User Manual 1178.5566.02 ─ 07
15
Troubleshooting
...........................................................................................483
Collecting Information for Technical Support
.........................................................487
...............................................................................488
15.1
Displaying Information
Status information
Status information is displayed in the title bar of the graphical user interface. See
Chapter 4, "Operating Concepts"
In remote control, the status reporting system stores all information on the current
operating state and occurred errors. See:
●
Chapter 13.14, "Using the Status Register"
●
Chapter 14.4, "Status Reporting System"
Instrument information
Instrument information, including the installed hardware and software options, is availa-
ble under
Chapter 11.2, "Instrument Info"
The hardware configuration is provided separately under
In remote control, use the commands described in
Chapter 13.13.7, "Instrument Infor-
Sensor information
You can display information about one of the connected power sensors. See
In remote control, use the commands described in
Chapter 13.13.7, "Instrument Infor-
15.2
Error Messages
The graphical user interface has a notification center where all information, warning
and error messages are collected. See
Chapter 4, "Operating Concepts"
In remote control, use the commands described in
Chapter 13.13, "System Information
Error Messages
www.allice.de
Allice Messtechnik GmbH