R&S 1424.7005.02, Руководство пользователя

Страница: 29 / 514

Getting Started
R&S
®
NRX
29 User Manual 1178.5566.02 ─ 07
3.2.2.3 USB Device Interface
See (3) in Figure 3-3 .
USB 2.0 (universal serial bus) interface of the type B (receptacle). Used to connect the
R&S NRX to a computer for USB remote control.
3.2.2.4 USB Host Interface
See (4) in Figure 3-3 .
See Chapter 3.2.1.5, "USB Host Interface" , on page 27.
3.2.2.5 AC Supply and Power Switch
See (5) in Figure 3-3 .
When the R&S NRX is connected to the AC supply, it automatically sets itself to the
correct range for the applied voltage. The range is printed on the type label. There is
no need to set the voltage manually.
For more details, see Chapter 3.1.6, "Connecting to the AC Power Supply" ,
on page 19.
3.2.2.6 IEC 625/IEEE 488 Interface
See (6) in Figure 3-3 .
Requires GPIB/IEEE488 interface (R&S NRX-B8).
IEC bus (IEEE 488) interface for remote control of the R&S NRX. Used to connect a
controller to remote control the R&S NRX. Use a shielded cable for the connection.
Characteristics of the IEC bus (IEEE 488) interface:
●
8-bit parallel data transfer
●
Bidirectional data transfer
●
Three-wire handshake
●
High data transfer rate
●
Maximum length of connecting cables 15 m (single connection 2 m)
Instrument Tour
www.allice.de Allice Messtechnik GmbH