R&S 1424.7005.02, Руководство пользователя

Страница: 25 / 514

Getting Started
R&S
®
NRX
25 User Manual 1178.5566.02 ─ 07
2. Pull the option from its casing.
3. Insert the other option.
4. Press until you hear a click when the latch locks.
Further information:
●
Chapter 3.1.8, "Connecting Power Sensors" , on page 21
●
"Sensor Check Source tab" on page 144
●
Chapter 13.8, "Configuring the Test Generator" , on page 365
3.2.1.3 Touchscreen
See (3) in Figure 3-2 .
The R&S NRX displays results in panes. Depending on the measurement mode, val-
ues are displayed digitally or graphically.
False triggers can occur
If an object (e.g. a human finger) that is charged with static electricity is brought near
the touch panel, false triggers can occur.
This behavior is caused by the principle of operation of a PCAP (projected capacitive)
touch panel.
Further information:
●
"Using the touchscreen" on page 31
3.2.1.4 Keys
See (4) in Figure 3-2 .
[Esc] / Local
If you press shortly:
●
Changes to the next-higher hierarchy level.
●
Escapes from the entry mode in text boxes and lists.
●
Closes dialogs without losing any entries that have been made.
●
Switches from remote control mode (all controls disabled) to manual operation.
If you press and hold:
●
Goes to the start dialog that shows an overview of the active measurements.
See
Chapter 4.1.1, "Start Dialog" , on page 31.
Instrument Tour
www.allice.de Allice Messtechnik GmbH