R&S 1332.4500K22, Руководство пользователя

Страница: 1156 / 1709

Command reference
R&S
®
ZNA
1156 User Manual 1178.6462.02 ─ 20
Parameters:
<Boolean> ON - all markers have the same color, to be defined via
DISPlay:CMAP<DispEl>:RGB <Red>, <Green>, <Blue>
.
The marker color is independent of the trace colors.
OFF - each marker has the color of the associated trace.
Example: See
DISPlay:CMAP<DispEl>:RGB
Manual operation: See "General > Same Color all Markers" on page 780
DISPlay:CMAP<DispEl>:RGB <Red>, <Green>, <Blue>[, <TraceStyle>[,
<TraceWidth>]]
Defines the user color scheme using the Red/Green/Blue color model. For traces also
the line style and width can be defined.
Use
DISPlay:CMAP:TRACe:RGB
to define the properties of a particular trace, refer-
enced by its name.
Suffix:
<DispEl>
.
Number of the display element as described in the table below.
Parameters:
<Red> Red content of the defined color.
Range:
0 (zero intensity, corresponding to a 0 in the 24-bit
color model) to 1 (full intensity, corresponding to
255 in the 24-bit color model).
<Green> Green content of the defined color.
Range:
0 (zero intensity, corresponding to a 0 in the 24-bit
color model) to 1 (full intensity, corresponding to
255 in the 24-bit color model).
<Blue> Blue content of the defined color.
Range:
0 (zero intensity, corresponding to a 0 in the 24-bit
color model) to 1 (full intensity, corresponding to
255 in the 24-bit color model).
<TraceStyle> SOLid | DASHed | DOTTed | DDOTted | DDDotted
Optional trace style, only for traces (
<DispEl>
> 12): One of the
string parameters
SOLid | DASHed | DOTTed | DDOTted
| DDDotted
.
<TraceWidth> Optional trace width, only for traces (
<DispEl>
> 12).
Range: 1 to 20
SCPI command reference