R&S 1322.8003K06, Руководство пользователя

Страница: 98 / 555

Common Measurement Settings
R&S
®
FSPN
98 User Manual 1179.4363.02 ─ 01
See Chapter 6.2, "Input Source" , on page 99 .
2. Amplitude / Scaling
See Chapter 6.3, "Level Characteristics" , on page 101.
3. Frequency
See Chapter 6.4, "Frequency" , on page 105.
4. Noise
See Chapter 6.5, "Noise Measurement Configuration" , on page 110.
5. Output
See Chapter 6.6, "DC Source Configuration" , on page 123.
6. Analysis
See Chapter 7, "Common Analysis and Display Functions" , on page 143.
7. Display Configuration
See Chapter 5.4, "Result Displays" , on page 87.
Selecting the noise measurement type ......................................................................... 98
Preset Channel ............................................................................................................. 98
Specific Settings for ..................................................................................................... 98
Selecting the noise measurement type
The R&S FSPN provides different types of measurements to measure the noise char-
acteristics of a DUT.
●
Phase Noise
Phase noise and AM noise measurements for continuous wave signals.
●
Baseband Noise
Noise measurement in absolute terms over a selected frequency range.
●
VCO Characterization
Measurements to determine the characteristics of a voltage controlled oscillator
(VCO).
●
Spot Noise vs Tune
Phase noise and AM noise measurements for a voltage controlled oscillator (VCO).
Remote command:
CONFigure:PNOise:MEASurement
on page 323
Preset Channel
Select the "Preset Channel" button in the lower left-hand corner of the "Overview" to
restore all measurement settings
in the current channel to their default values.
Remote command:
SYSTem:PRESet:CHANnel[:EXEC]
on page 462
Specific Settings for
The channel may contain several windows for different results. Thus, the settings indi-
cated in the "Overview" and configured in the dialog boxes vary depending on the
selected window.
Configuration Overview