R&S 1322.8003K06, Руководство пользователя

Страница: 40 / 555

Getting Started
R&S
®
FSPN
40 User Manual 1179.4363.02 ─ 01
Connector Reference signal Usage
REF INPUT 1...20 MHz
0...10 dBm
To provide an external reference signal on the
R&S
FSPN.
REF OUTPUT 1...20 MHz
0...10 dBm
To provide the same external reference signal received
by the REF INPUT 1...20 MHz connector to another
device, when available.
REF OUTPUT 10 MHz
10 dBm
To provide the internal reference signal from the
R&S
FSPN to another device continuously.
Also used to provide OCXO reference signal to another
device.
REF INPUT 100 MHz
0...10 dBm
To provide an external reference signal on the
R&S
FSPN.
REF OUTPUT 100 MHz
6 dBm
To provide a 100 MHz reference signal from the
R&S
FSPN to another device.
REF OUTPUT 640 MHz
16 dBm
To provide a 640 MHz reference signal from the
R&S
FSPN to another device.
SYNC TRIGGER
The SYNC TRIGGER connector can also be used to synchronize the reference fre-
quency on several devices.
3.2.2.11 Labels on R&S FSPN
Labels on the casing inform about:
●
Personal safety, see "Meaning of safety labels" on page 13
●
Product and environment safety, see Table 3-2
●
Identification of the product, see Chapter 3.2.2.12, "Device ID" , on page 40
Table 3-2: Labels regarding R&S FSPN and environment safety
Labeling in line with EN 50419 for disposal of electrical and electronic equipment after the prod-
uct has come to the end of its service life. For more information, see the product user manual,
chapter "Disposal".
3.2.2.12 Device ID
The unique device identifier is provided as a barcode sticker on the rear panel of the
R&S
FSPN.
It consists of the device order number and a serial number.
Instrument Tour