R&S 1322.8003K06, Руководство пользователя

Страница: 280 / 555

Network and Remote Operation
R&S
®
FSPN
280 User Manual 1179.4363.02 ─ 01
C:\Program Files (x86)\Rohde-Schwarz\FSPN\<version>\iecwin32.exe
You can also copy the program to any Windows PC or laptop. Simply copy the
iecwin32.exe
,
iecwin.chm
and
rsib32.dll
files from the location above to the
same folder on the target computer.
When the tool is started, a "Connection settings" dialog box is displayed. Define the
connection from the computer the IECWIN tool is installed on to the R&S
FSPN you
want to control. If you are using the tool directly on the R&S FSPN, you can use an NT
Pipe (COM Parser) connection, which requires no further configuration. For help on
setting up other connection types, check the tool's online help (by clicking the "Help"
button in the dialog box).
The IECWIN offers an online help with extensive information on how to work with the
tool.
10.3 Network and Remote Control Settings
Access : [SETUP] > "N Remote"
The remote commands required to define these settings are described in Chap-
ter 11.9.5, "Configuring Network and Remote Control" , on page 492.
Step-by-step instructions are provided in Chapter 10.4, "How to Set Up a Network and
Remote Control" , on page 290.
● General Network Settings ..................................................................................... 280
● GPIB Settings ........................................................................................................282
● Compatibility Settings ............................................................................................285
● LAN Settings ......................................................................................................... 286
● Remote Errors .......................................................................................................288
● Returning to Manual Mode ("Local") ..................................................................... 289
10.3.1 General Network Settings
Access : [SETUP] > "N Remote" > "Network" tab
The R&S FSPN can be operated in a local area network (LAN), for example to control
the instrument from a remote PC or use a network printer.
Network settings can only be edited in the firmware if a LAN cable is connected to the
R&S
FSPN.
Network and Remote Control Settings