R&G RGH0001BK, Инструкция по монтажу

Страница: 3 / 6

R&G Racing
Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com
PICTURE 3
PICTURE 4

Remove the two plastic grommets from holes in position shown in picture 3.

Remove original bolt from position shown in picture 4.

Place spacer from kit (ITEM 4, S0380) into recess in position shown in picture 4.

Place the two spacers (ITEMS 8 & 9, S0385 & S0386) into slots in the hugger (ITEM 1,
HUG0001) a small amount of blue tack or similar will hold them in place whilst fitting (as shown
in picture 5).

If not already fitted stick the mounting pads (ITEM 5) to boot guard section of hugger as shown in
picture 6.
PICTURE 5
PICTURE 6
PICTURE 7 PICTURE 8

Offer the hugger into swing-arm and align holes in hugger with the tapped holes in swing-arm.