PAGE 8 OF 19
R&G Racing
Unit 1, Shelleys Lane, East Worldham, Alton, Hampshire GU34 3AQ.
Tel: +44 (0)1420 89007 Fax +44 (0)1420 87301
www.rg
-
racing.com
Email:
info@rg
-
racing.com
LP0282
•
Offer the assembly into position as original while feeding the wires through the under
-
tray as original
and using the two shorter M6 button head bolts and washers (
items 6
and
9
) through the front
holes (the front of the motorcycle) from underneath, use two of the Nyloc nuts with washers (
items
5
and
6
) to secure in position as shown in
pictures 17
and
18
.
•
Tidy the wiring using the cable ties (item 16) provided.
•
Use the longer M6 button head bolt with washer (
items 6
and
8
) through the rear hole and secure
using the remaining nut and washer (
items 5
and
6
) to secure in position as shown in
pictures 17
and
18
.
•
Reconnect all the indicator wiring plugs or bullet connectors and check operation (if illumination fails,
swap the bullet connections around).
•
Connect the licence plate illuminator using the supplied connector (
item 16
) (if illumination fails,
swap the bullet connections around).
•
Fit licence plate to new licence plate bracket (it may require re
-
drilling).
IMPORTANT: IF FITTING A FULL
-
SIZE LICENCE PLATE AND PLACING IT FAR DOWN ON
THE LICENCE PLATE HANGER, THERE IS A SMALL CHANCE OF THE LICENCE PLATE
HITTING THE BACK WHEEL UNDER HEAVY LOAD AND OVER LARGE BUMPS IN THE ROAD.
IT IS YOUR RESPONSIBILITY TO CHECK FOR THIS POSSIBILITY AND TAKE AVOIDING
ACTION. FAILURE TO CHECK COULD RESULT IN SERIOUS INJURY.
•
Refit the tool holder/cable harness as original.
•
Refit the infill panel as original.
•
Refit both seats.
•
Depending on local laws, attach enclosed red reflector (
item 13
) in an appropriate location.
Please test the indicators, rear light and licence plate illuminator before riding.
ISSUE 1
-
11/06/2021 (TB)
CONSUMER NOTICE
The catalogue description and any exhibition of samples are only broad indications of the Products and R&G may
make design changes which do not diminish their performance or visual appeal and supplying them in such state
shall conform to the order. The Buyer acknowledges no representation or warranty (other than as to title) has been
given or will apply to the Products other than those in R&G
’
s order or confirmation and the Buyer confirms it has
chosen the Products as being of merchantable quality and suitable for its particular purposes. Where R&G fits the
Products or undertakes other services it shall exercise reasonable skill and care and rectify any fault free of charge
unless the workmanship has been disturbed. The Buyer is responsible for ensuring that the warranty on the
motorcycle is not affected by the fitting of the Products. On return of any defective Products R&G shall at its option
either supply a replacement or refund the purchase money but shall not be liable if the Products have been
modified or used or maintained otherwise than in accordance with R&G
’
s or manufacturer
’
s instructions and good
engineering practice or if the defect arises from accident or neglect. Other than identified above and subject to
R&G not limiting its liability for causing death and personal injury, it shall not be liable for indirect or consequential
loss and otherwise its liability shall be limited to the amounts paid by the Buyer for the Products or the fitting or
service concerned. These terms do not affect the Buyer
’
s statutory rights.
R&G RETURNS POLICY (NON
-
FAULTY GOODS)
Returns must be pre
-
authorised (if not pre
-
authorised the return will be rejected). Goods may only be returned
direct to us if they were purchased direct from us (customer must prove if necessary). Otherwise to be returned to
original vendor. Goods must be in re
-
sellable condition, in the opinion of R&G. All returns are subject to a 25%
restocking and handling fee (25% of the gross value exc. P&P –
at the prevailing price at time of purchase). The
customer must pay any and all carriage charges. No returns of discontinued products, unless within 14 days of
purchase. This policy does not affect your statutory rights and does not refer to faulty goods.
