R&G Racing
Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
Email:
Page | 12
If fitting the R&G Mini Indicators, secure in place using the nut and use the rubber bung supplied (item 14) to
blank off the smaller hole. Fit one length of heatshrink (item 18) to the wiring and feed it up through the central
hole, as shown in pictures 27, 28, 29 & 30.
Take the underseat cover (item 10 – TB0201 Part 2) and fit the two rubber ‘U’ profile edging strips (item 9) to
the two long curved edges using a suitable adhesive to hold in place, as shown in picture 31.
This protects the
inside of the seat when fitted from the sharp edge of the metal.
Take the remaining, small piece of rubber ‘U’ profile edging strip and fit to the edge shown in picture 32.
Offer the underseat cover up to the underside of the rear subframe and fit the two M6 x 12mm long button head
bolts (item 13) with two M6 washers (item 6) through the two front mounting holes and loosely tighten into the
threaded bosses on the rear subframe, as shown in picture 33.
Fit the remaining two M6 x 6mm long button head bolts (item 15) with two M6 washers (item 6) through the
two rear mounting holes and tighten into the threaded holes of the already fitted licence plate bracket, as shown
in picture 34.
If the underseat cover does not fit easily, loosen the bolts to the licence plate bracket and re-align
within the slotted mounts, before re-tightening the bolts.
Ensure all bolts are tightened evenly and the underseat cover is securely mounted in place.
If fitting the forward mounted indicator option
Take the forward indicator bracket (item 11 – TB0201 Part 3) and fit the indicators of choice by feeding the
wiring through the larger hole on the indicator bracket and locating the indicator boss within the hole.
If fitting the R&G Mini Indicators, secure in place using the nut and use the rubber bung supplied (item 14) to
blank off the smaller hole, as shown in pictures 35 & 36. Fit one length of heatshrink (item 18) to the wiring and
use a self-adhesive cable clip (item 20) to secure in place on the bracket.
If fitting the OEM indicators, re-use the cap head bolt to secure the indicator in place.
Take the underseat cover (item 10 – TB0201 Part 2) and fit the two rubber ‘U’ profile edging strips (item 9) to
the two long curved edges using a suitable adhesive to hold in place, as shown in picture 31.
This protects the
inside of the seat when fitted from the sharp edge of the metal.
Take the remaining, small piece of rubber ‘U’ profile edging strip and fit to the edge shown in picture 32.
Offer the underseat cover up to the underside of the rear subframe and fit the two M6 x 30mm long button head
bolts (item 12) with two M6 washers (item 6) through the two mounting holes on the indicator bracket and then
the two front mounting holes on the underseat cover (see exploded diagram) and loosely tighten into the
threaded bosses on the rear subframe, as shown in picture 37.
Ensure the wiring is neatly routed, with the OEM indicator wiring routed around the side of the underseat cover
and the R&G mini indicator can be routed through the large opening between the indicator bracket and underseat
cover, as shown in picture 38.
Fit the remaining two M6 x 6mm long button head bolts (item 15) with two M6 washers (item 6) through the
two rear mounting holes and tighten into the threaded holes of the already fitted licence plate bracket, as shown
in picture 34.
If the underseat cover does not fit easily, loosen the bolts to the licence plate bracket and re-align
within the slotted mounts, before re-tightening the bolts.
Ensure all bolts are tightened evenly and the underseat cover is securely mounted in place.
Secure the seat locking mechanism cable in place on top of the underseat cover using two cable ties (item 17)
as
shown in pictures 39 & 40.
It is advisable to check for the correct operation of the seat lock at this stage.
Connect the tail light/indicator loom (item 22 – CON0045) to the connector on the bikes loom, as shown in
picture 41, before connecting the tail light connectors up as follows
OEM GREEN/PURPLE ---------------------- LA0003 RED
OEM YELLOW ------------------------------- LA0003 YELLOW
OEM BLACK ---------------------------------- LA0003 BLACK
