R&G LP0158, Инструкция по монтажу

Страница: 4 / 17

R&G Racing
Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com
Page | 4
PICTURE
9
PICTURE
10
PICTURE
11
FITTING INSTRUCTIONS

REMOVE THE RIDER SEAT USING KEY (SEE PICTURE 1) AND REMOVE THE
PILLION SEAT/SEAT COWL.

DISCONNECT THE INDICATOR PLUG SOCKETS AS SHOWN IN PICTURE 2.

DISCONNECT THE LICENCE PLATE ILLUMINATOR PLUG SOCKET AS SHOWN
IN PICTURE 3.

UNDO AND REMOVE THE FOUR BOLTS ARROWED IN PICTURE 4 WHILE
SUPPORTING THE ORIGINAL LICENCE PLATE BRACKET.

GENTLY REMOVE THE ORIGINAL LICENCE PLATE BRACKET WHILE
FEEDING THE ORIGINAL WIRING THROUGH THE RUBBER GROMMET.
IF REUSING THE ORIGINAL INDICATORS

REMOVE THE FOUR BOLTS ARROWED IN PICTURE 5 AND REMOVE THE
UNDER-TRAY/COVER TO ALLOW ACCESS TO THE ORIGINAL INDICATORS.

REMOVE THE NUT SHOWN IN PICTURE 6 AND REMOVE THE ORIGINAL
INDICATOR, REPEAT FOR THE OTHER INDICATOR.