OPERATOR MANUAL
IMPORTANT INFORMATION, KEEP FOR OPERATOR
2016 Gees Mill Road, Suite 200, Conyers, GA 30013
888-994-7636, fax 888-864-7636
unifiedbrands.net
PART NUMBER PP MNL2105, REV. A (09/21)
This manual provides information for:
PT-W-L SERIES PREP TABLES
THIS MANUAL MUST BE RETAINED FOR FUTURE REFERENCE. READ,
UNDERSTAND AND FOLLOW THE INSTRUCTIONS AND WARNINGS
CONTAINED IN THIS MANUAL.
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance.
WARNING
R290 flammable refrigerant in use.
Improper installation,
adjustment, alteration, service or maintenance can cause property
damage, injury or death. Read the installation, operating and maintenance
instructions thoroughly before installing or servicing this equipment.
NOTIFY CARRIER OF DAMAGE AT ONCE
It is the responsibility of the
consignee to inspect the container upon receipt of same and to determine
the possibility of any damage, including concealed damage. Unified
Brands suggests that if you are suspicious of damage to make a notation
on the delivery receipt. It will be the responsibility of the consignee to file
a claim with the carrier. We recommend that you do so at once.
Manufacture Service/Questions 888-994-7636.
RETAIN THIS MANUAL FOR FUTURE REFERENCE
NOTICE: Due to a continuous program of product improvement, Unified Brands
reserves the right to make changes in design and specifications without prior notice.
NOTICE: Please read the entire manual carefully before installation. If certain
recommended procedures are not followed, warranty claims will be denied.
MODEL NUMBER _________________________
SERIAL NUMBER _________________________
INSTALLATION DATE ______________________
The serial number is located in the cabinet left side
or back wall closest to the compressor compartment
under the drawer track. An example is shown here.
EQUIPMENT DESCRIPTION
MODEL
LENGTH
DEPTH
HEIGHT
PAN
CAPACITY
1/6 SIZE
DOORS
STORAGE
CU. FT.
HP
VOLT/
CYCLE/
PHASE
AMPS
NEMA PLUG
SHIP WT.
UNIT
OVERALL WITH
CUTTING BOARD
WORK
SURFACE
OVERALL
COVER OPEN
PT48-18W-L
48"
33"
36.125"
34.75"
49"
18
(2) 18"
10.1
1/5
115/60/1
3.5
5-15P
411
PT60-24W-L
60"
33"
36.125"
34.75"
49"
24
(1) 21", (1) 27"
14.7
1/4
115/60/1
3.5
5-15P
456
PT72-30W-L
72"
33"
36.125"
34.75"
49"
30
(2) 27"
19.2
1/4
115/60/1
3.5
5-15P
502
PT84-36W-L
84"
33"
36.125"
34.75"
49"
36
(1) 18", (2) 27"
24.15
1/4
115/60/1
3.5
5-15P
565
Information contained in this document is known to be current and accurate at the time of printing/creation. Unified
Brands recommends referencing our product line websites, unifiedbrands.net, for the most updated product information
and specifications. © 2018 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover
Corporation.
