background image

difoodservice.com

5

warranty for a period of ninety days following installation with proof of starting
date, up to a maximum of nine months from date of purchase. Travel time is
limited to one hour each direction or two hours per invoice

. Any travel time

exceeding two hours will be the responsibility of the customer.

Temperature adjustments are not covered under warranty,

due to the wide

range of ambient conditions.

To request a warranty approval number, call our Field Service Department at:
1-800-621-8560

WHEN OPTIONAL 5 YEAR COMPRESSOR WARRANTY APPLIES

1. Provide reimbursement to servicing company for the cost of locally

obtained replacement compressor in exchange for the return of the
defective compressor sent back freight prepaid.

Note:

Randell

Manufacturing does limit amount of reimbursement allowed and does
require bill from local supply house where compressor was obtained
(customer should not pay servicing agent up front for compressor).

2. Provide repair at the manufacturing facility by requiring that the

defective unit be sent back to Randell freight prepaid. Perform repair at
the expense of Randell and ship the item back to the customer freight
collect.

3. Furnish complete condensing unit freight collect in exchange for the

return of the defective compressor sent back freight prepaid.
(Decisions on whether or not to send complete condensing units will be

made by Randell’s in-house service technician).

WHEN OPTIONAL LABOR EXTENSION POLICY APPLIES

Randell Manufacturing will provide reimbursement of labor invoiced to any
customer that has an optional labor extension of our standard warranty.
(Reasonable geographic and industry rates do apply) Randell offers both 1
and 2 year extensions. Labor extensions begin at the end of our standard
warranty and extend out 9 months to 1 calendar year or 21 months to 2
calendar years from date of purchase.

Please contact Randell

Manufacturing’s

technical service hotline at 1-800-621-8560 for details and

warranty authorization numbers.

WHEN EXPORT WARRANTIES APPLY

1. Randell Manufacturing covers all non-electrical components under the

same guidelines as our standard domestic policy.

2. All electrical components operated on 60 cycle power are covered

under our standard domestic policy.

3. All electrical components operated on 50 cycle power are covered for

90 days from shipment only.

4. Extended warranty options are not available from the factory.

ITEMS NOT COVERED UNDER WARRANTY

1. Maintenance type of repairs such as condenser cleaning, temperature

adjustments, clogged drains and unit leveling.

2. Randell does not cover gaskets under warranty.

Gaskets are a

maintenance type component that are subject to daily wear and tear
and are the responsibility of the owner of the equipment. Because of

Содержание PH120E2-220























Отзывы: