1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Custom
Dry Equipment Stand
models 22000
Description:
Open shelving cooking equipment stand with reinforced stain-
less steel equipment shelf. Integral backsplash with 45˚ return.
Dry storage drawers on 16 gauge tracks with 1 5/8" stainless
bearings and removable plastic pan. 6" high adjustable and
movable legs.
Shown with optional finished end.
Standard Features:
• Available under one piece top with other modular
equipment up to 16' in length
• 6" high legs—adjustable and movable
• 10 3/8" wide x 1 1/4" thick laminated maple work board
• If unit is fitted with vent, then backsplash will be 3" thick
to meet NFPA 96
• Removable plastic pan supplied for each self-closing
drawer
• 45˚ integral stainless backsplash is standard.
90˚ stainless backsplash is optional.
• Equipment Rails are optional
Specifications:
EQUIPMENT SHELF: Equipment shelf to be one piece of die-
formed stainless steel with 2" nosing and marine edge. Shelf is
reinforced with welded channel brace assembly.
UNIT BODY: Body ends to be die-formed stainless steel, finished
and polished on the inside, with corrosion resistant steel exterior.
Ends at top fitted with recessed heavy duty steel bars for splining
units together, producing a hairline seam. Backsplash to be
coved cornered, with 45˚ return at top and overall height of 6 3/
4". (If fitted with vent system, standard backsplash to be omitted
and unit fitted with 3" thick backsplash to meet NFPA 96). 10
3/8" wide x 1 1/4" thick laminated maple cutting board provided
with removable supports. Dry storage drawers are located below
equipment shelf. Drawer pans are plastic, removable without
tools, with drawer track of 16 gauge stainless steel with 1 5/8"
stainless steel bearings, self-closing. Drawer front of 22 gauge
stainless steel. Drawer track, pans and front assembly contained
in 20 gauge steel housing. Legs to be 6" high stainless steel, with
adjustable bullet foot. Legs mounted to full length channel frame
assembly which is integrally welded to bottom of assembly.
Legs can be moved left to right to avoid floor obstacles during
installation.
Randell Custom, Page 5
Revised 09/04
model
22348
22360
22372
22384
22396
223108
223120
29" Deep Equipment
Length 48" 60" 72" 84" 96" 108" 120"
Height* 36" 36" 36" 36" 36" 36" 36"
Drawers (2) 24"
(2) 18" (2) 24"
(3) 24"
(2) 18" (2) 24"
(4) 24"
(2) 18" (3) 24"
(5) 24"
Ship Wt. 279 lbs. 329 lbs. 377 lbs. 427 lbs. 476 lbs. 526 lbs. 570 lbs.
33" Deep Equipment
Length 48" 60" 72" 84" 96" 108" 120"
Model No. 22348 22360 22372 22384 22396 22608 22620
Height* 36" 36" 36" 36" 36" 36" 36"
Drawers
(2) 24"
(2) 18" (2) 24"
(3) 24"
(2) 18" (2) 24"
(4) 24"
(2) 18" (3) 24"
(5) 24"
Ship Wt. 279 lbs. 329 lbs. 377 lbs. 427 lbs. 476 lbs. 526 lbs. 570 lbs.
• Equipment shelf depth is 25" deep on 29" deep equipment.
• Equipment shelf depth is 29" deep on 33" deep equipment.
• Inside clearance = total unit length less 3"
* All models with adjustable and movable legs for 35 1/2" to 36 3/4" work height.
