4
Install the Mount
NOTE:
Follow all local regulations governing the placement of the mount. Select an area with a line of sight to the sky
and GPS satellites to ensure reliable GPS information.
1. Clean and dry the mounting area.
2. Remove the suction cup protective film.
3. Adjust the angle of the mount using the thumbscrew.
4. Pull the suction cup lever up to release suction.
5. Clip the two pieces of the mount together.
Slide up to secure.
6. Plug the power cord into the mount and the
vehicle’s 12-volt power source.
7. Attach the tablet to the mount.
8. Place and hold the mount suction cup against the
mounting surface.
9. Press the suction cup lever down until it snaps into place.
10. Adjust the tablet so that it can be easily seen and does not block the driver’s line of sight.
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
