Page 1
OBDII Converter Installation Instructions
1. Introduction
The OBDII converter kit is an off-the-shelf product from
B&B Electronics. The OBDII converter enables the Rand McNally
TND
™
760 to connect to the OBDII data bus in light duty
vehicles and passenger cars.
This document describes how to connect the OBDII converter to
the TND
™
760, and the operational considerations to be aware
of when using the OBDII converter as part of your vehicle
monitoring system.
Additional documentation can be found at
www.randmcnally.com/OBDII.
B&B OBDII Converter Kit
Part Number: RMLDVSV2-KIT
Kit contains the following items:
1A.
OBDII Converter
1B.
OBDII Converter Mounting Hardware (zip ties &
double-sided tape) (not pictured)
1C.
OBDII Y Cable
2.2 Required Items
1
2
Rand McNally TND
™
760 Flying Lead Cable
with B&B Termination
Part Number: 052800655
2. Installation
2.1 Warnings
Rand McNally recommends that a professional automotive
technician install the OBDII converter.
A common installation location is under the dash of the vehicle.
The installer must be careful to secure the OBDII converter and
any wiring in a location that will not interfere with the driver,
the operation of the vehicle, or the operation of the airbag
system. The installer must also consider the possibility that the
mounting hardware may fail. Similarly, such a failure should not
cause interference with the driver, the operation of the vehicle,
or the operation of the airbag system.
2
1A
1C
For use with your TND
™
760 & Light or
Medium Duty Cars or Trucks
