25)
Set jack in tray and slide Quick fist mounting bolts
through holes in jack. Tighten Quick Fist mounting
hardware. See illus 9.
Illus 9
26)
A padlock may be used to lock jack to tray. Some jacks
may need hole enlarged to accommodate padlock.
See illus 10.
Illus 10
27)
This kit contains hardware to fit OE wheels and
aftermarket wheels. OE lug nuts can be used to secure
wheel to tire carrier.
28)
For OE wheel mount: Insert three ½”-20 x 3.0 bolts in
mount plate with provided wheel spacer 176547.
Secure wheel spacer to tire carrier with one ½”-20 x
1.75 bolt as shown in illus 11.
Illus 11
29)
For aftermarket wheel with 4.5” backspacing, install
three ½”-20 x 1.75 bolts in mount plate. Secure wheel
to tire carrier with OE lug nuts
NOTE: Tire should fit securely against the frame of the tire
carrier to reduce vibrations and movement. Some unique
combinations of wheel and tires may need to modify spacer
to fit securely against tire carrier frame.
CAUTION: Do not install a spare tire and wheel weighing
more than 100 lbs. Do not use wheel spacer on drive
wheel, use as a spare tire spacer only.
Check clearances by slowly opening the tire carrier and
making sure that the jack or tire does not contact the body
of the vehicle.
½”-20 x 3.0 bolt
½”-20 x 1.75 bolt
176547