NOTE:
Allow the display to stop flashing before making another
selection. If too many selections are made, an error may occur
(“E” on the display). Push set button to restart.
OPERATION:
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
If display is blank, push set button to activate.
To adjust shock absorbers to a preset setting:
•
Push the up or down arrow until the desired preset is
selected.
•
Push set button once to accept. The selection flashes and
the compressor starts and stops automatically.
To adjust shock absorbers to a custom setting:
•
Push the down arrow until
MY
RIDE
is selected.
•
Push set button once to select the front shocks.
•
Push up arrow to increase stiffness or down arrow to
decrease stiffness.
•
Once the desired ride control is reached, push set button
to accept. Rear shocks are automatically selected.
•
Push up arrow to increase stiffness and down arrow to
decrease stiffness.
•
Once the desired ride control is reached, push set button
to accept. The selection flashes and the compressor
starts and stops automatically.
Rancho Industries U.S.A. Limited Warranty
RS9000 RCX Remote Control
The RS9000 RCX Remote Control (RS99701) is limited to a 2-year, 24,000 mile warranty. Tenneco Automotive warrants each new RS9000
RCX Remote Control system against factory defects in material and workmanship (except for finish, including the shock boot) for the first to
occur of 2 years or 24,000 miles after the date of purchase.
For more warranty information or technical assistance, visit our website at
www.gorancho.com
or call 1-734-384-
7804.
