Troubleshooting Adaptive Cruise
:
1.
Make sure A.C.C. module is installed properly and plugged in.
2.
Make sure module bracket is bolted to the FRONT side of the angle iron. Burrs on the back side of the angle
iron may cause A.C.C. module to not sit straight.
3.
The angle iron should be parallel to the pipe and front insert. If it is welded at an angle it will cause adaptive
Cruise not to function properly.
-------------------------- WARNING ------------------------
Special care should be exercised in the handling, storage and installation of Kaspar Ranch Hand equipment.
The actual weight of each piece of equipment will vary depending on style and model. The weight of the equipment is enough in volume to warrant
special care, assistance and in some instances, the use of mechanical equipment during the transfer and installation of the equipment.
Do not assume a position directly under the equipment during installation. Be sure the equipment has been connected and stabilized during
installation to prevent falling or shifting of positions.
Periodically check tightness of bolts to make sure they are tight, and unlikely to fail.
1/31/20
