Rana Ranababy, Руководство пользователя, Страница: 9 / 16

13)Press the "talk" button and hold, then talk to the mobile phone, then finished and let
go, and then pop up a screen (Fig22).When the voice transmission is completed,
restore the main interface screen. Click the "talk" button will pop up 4 tones shown as
Fig23.You can choose any one to change the tone of speech.
14)Press the record button , the robot start recording, press again to stop recording.
Fi g 21 Fig 22 F ig 23
正 在 发 送 语 音. . .
RanaBaby
2.Menu
1
)
Settings(Fig24)
The word in red box is the name of robot,you can name it by yourself.
There
are four options
,
WiFi No.1~No.3 are extenal WiFi
,
these three wifi
networks can be writed in Robot. The Robot will switch automatically among these
three networks. The
"
Ranababy” is a special network
.
when the robot is used with
no external wifi ， two eyes of robot will flash together. In this state, when you choose
“Ranababy” here ,the App will connect with robot directly without external wifi .
2
)
Robot management
a
)
A mobile phone can supports multiple robots, each robot can be named by its user.
Only one robot can be controled remotely by cell phone simultaneously. You can
switch between different robots in the "Ranababy Management".
(
Fig26)
.
b
)
If a robot has not been added to the software in the past, as long as the phone and
the robot share a same router, press the + sign at the bottom, the robot will appear in
the list.
c ) Press the + sign ， if a interface shown as Fig28 is poped up ， you can press
“scan QR” button
，
scan the QR code on the bottom of robot to add a new robot.
d
)
If there is a new robot witch is not be writed any network.Press the + sign
，
and then
follow the steps to "Getting Started" describes operations.
8