RAMVAC OWL, Руководство пользователя и инструкции по установке

Страница: 13 / 28

Page 11 SOF_7.2.3-02-152
Effective date: 30-May-08
OWL User Gude
Unit Status Description
1. UNIT STATUS
a. Enter on the keypad gives the UNIT STATUS equipment selection.
2. UNIT STATUS equipment selection
a. Gives a choice of the system equipment.
i. Next or Prev buttons on the keypad to toggle the equipment selection.
b. Enter on the keypad at the the equipment selection screen gives access to individual units and their mode status,
available in the selected equipment family.
Note: A mode description screen shows for 5 seconds before continuing to the individual unit selection.
A= Availible R= Run F = Fault
Note: This screen is accessed from two directions.
1
. The normal direction outlined above.
2
. From the UNIT IN FAULT screen on the first level.
c. The numbers 1,2,3,4 … in top row shows the unit numbers
d. The letters A,R,F below each number gives the status of the equipment selection in the system, corresponding to the number above it.
Note: The OWL only shows the equipment configured in the system.
e. Next or Prev arrow keys on the keypad to toggle the equipment selection.
f. Enter on the keypad produces one of four different screens.
g. Esc on the keypad returns to the UNIT STATUS screen.
Select Enter
3. EQUIPMENT MODE STATUS
a. Status - AVAIL The equipment selected is not running but is available to run if needed.
b. Status - RUNNING The equipment selected is running.
c. Status - FAULT The equipment selected is not running and is in fault.
d. Status - BYPASS The equipment selected is running but manually put in bypass.
i. This condition is reserved only for emergences. Running the pump during this condition will put the pump and warranty at risk.
Select the Prev Button
4. FAULT HISTORY
a. Enter on the keypad shows the unit selection history of faults starting with the most recent fault up to the last ten faults.
b. Next or Prev buttons on the keypad to toggle between the the range of faults.
c. Esc on the keypad gives the UNIT STATUS equipment selection screen.
Select the Prev Button
5. UNIT LIFETIME HOURS
a. Tells you how many hours the unit has run in its lifetime.
b. Esc on the keypad gives the UNIT STATUS equipment selection screen.
Select the Prev Button
6. UNIT HOURS UNTIL MAINTENANCE
a. Gives the number of run hours until maintenance is due on selected single units.
b. Esc on the keypad gives the UNIT STATUS equipment selection screen.
OPERATION AND MONITORING