4
This heater is pre-assembled in factory.
ASSEMBLY
OPERATING INSTRUCTION
• Place the heater on a firm level surface free from obstructions, and at least 3 ft.
away from any wall and any other objects such as furniture, curtains, plants or
combustible material.
• With the Power and Setting Control “ Power and Setting Control” in the ”OFF”
position, plug the heater into a grounded 220-240V outlet.
• Turn the heater ”ON” by turning the Power and Setting Control “Power and Setting
Control” clockwise to your desired power setting (FAN, LOW, MED, or HIGH). The
Power Indicator Light “ Power Indicator A C Light ” will illuminate. The power
settings operate as follows:
FAN: The Fan Circulates room air only. The heating elements are “OFF”.
LOW: The Fan and heating elements operate at 800 Watts.
MED: The Fan and heating elements operate at 1200 Watts.
HIGH: The Fan and heating elements operate at 2000 Watts.
• Turn the Thermostat Control “ Thermostat Control ” to your desired setting from
“MIN” to “MAX”.
CAUTION: This heater includes a Thermal Cut-Off Overheat Protection System
that shuts the heater off if it overheats due to abnormal conditions. If this occurs,
turn the heater ”OFF”, unplug it, and inspect and remove any objects on or
adjacent to the heater. Allow it to cool fora few minutes, plug it back in, and
resume normal operation.
SAFETY FEATURES
This heater is equipped with an automatic Safety Shutoff Switch for overheat
protection, which is activated when the internal temperature exceeds normal
operating temperatures.
If this occurs, turn the heater to “OFF”. Unplug the heater and allow it to cool.
Inspect and carefully remove any objects on or adjacent to the heater.
Plug the heater back in and resume normal operation.
Tip Over Switch: This heater includes a Safety Tip-Over Protection Feature which
will shut the heater off in case it is tipped over. If, at any time, the heater does tip
over, put the heater back in the upright position. The heater will resume its normal
operation.
