3
has boiled.
NOTE:
Do not fill the water over the maximum level, as water may spill out of
the spout when boiling. Ensure that the lid is firmly in place before plugging the
power outlet.
2. Position the kettle on the power base.
3. Connect the plug into a power outlet. Press down the switch, the indicator will
light up. Then start to boil the water, the kettle will switch off automatically once
the water has boiled.
NOTE:
Ensure that switch is free of obstructions and the lid is firmly closed,
the kettle will not turn off if the switch is constrained or if the lid is opening.
4. Lift the kettle from the power base and then pour the water.
NOTE: operate carefully when pouring the water from your kettle as boiling
water may result in scald, besides, don’t open the lid while the water in the
kettle is hot.
5. The kettle will not re-boil until the switch is pressed again. The kettle may be
stored on the power base when not in use.
BOIL-DRY PROTECT
Should you accidentally let the kettle operate without water, the boil-dry protection
will automatically switch off the power. If this occurs, allow the kettle to cool before
filling with cold water before re-boiling.
CLEANING AND MAINTENANCE
Always disconnect the appliance from the power outlet before cleaning.
1. Never immerse the kettle, power cord or power base in water, or allow
moisture to contact with these parts.
2. Wipe the appearance of body with a wild and damp cloth or cleaner, never use
a poisonous cleaner.
CAUTION
: Do not use chemical, steel, wooden or abrasive cleaners to clean
the outside of the kettle to prevent the gloss loss.
REMOVAL OF MINERAL DEPOSITS
Your kettle should be periodically descaled as the mineral deposits in tap water
may form scale on the bottom of kettle so as to cause the operation less efficiency.
You can use the commercially available descaler and follow the instructions on the
package of descaler. Alternatively, you may follow below instructions using the
white vinegar.
1. Fill the kettle with 3 cups of white vinegar, then adding water to the amount so
as to cover the bottom of kettle completely. Leave the solution in the kettle
overnight.
2. Then discard the mixture in the kettle, then filling the kettle with clean water,
boiling and then discard the water. Repeat several times until the odor of
vinegar has been flushed away.
Any stains remaining inside the spout can be
removed by rubbing with a damp cloth.
ENVIRONMENT FRIENDLY DISPOSAL