NOTE:
Do not fill the water over the maximum level, as water may spill
out of the spout when boiling. Ensure that the lid is firmly in place before
plugging the power outlet.
2. Connect the plug into a power outlet. Press down the switch, the
indicator will light up. Then start to boil the water, the kettle will switch off
automatically once the water has boiled.
NOTE
：
Ensure that switch is free of obstructions and the lid is firmly
closed
，
The kettle will not turn off if the switch is constrained or if the
lid is opening.
3. Lift the kettle and then pour the water.
NOTE:
operate carefully when pouring the water from your kettle
，
as
boiling water will scald.
4. The kettle will not re-boil until the switch is pressed down again.
Boil-dry protect
Should you accidentally let the kettle operate without water; the boil-dry
protection will automatically switch off the power. If this occurs, allow the
kettle to cool before filling with cold water before re-boiling.
4
Cleaning and maintenance
Always disconnect the appliance from the power outlet before cleaning.
1. Never immerse the kettle, power cord in water, or allow moisture to
contact with these parts.
2. Wipe the appearance of body with a wild and damp cloth or cleaner,
never use a poisonous cleaner.
CAUTION
: Do not use chemical, steel, wooden or abrasive cleaners to
clean the outside of the kettle to prevent the gloss loss.
