3. Press down the switch to
“1” position and the lamp will be illuminated. And
water begins to be heated up. Do not remove the lid while the water is
boiling.
4. Power will be cut off automatically and switch will be back to
“0” position
once water has been boiled. And the lamp will be off.
5. The boiling process can be terminated at any time by lifting the kettle off
the Power Base.
CAUTION:
1. Never operate the appliance empty. In the event of this case occurred, the
thermal cut-off inside the kettle would operate to cut off power
automatically. Unplug the appliance and let it completely cool down.
2. The filter must be in place during operation otherwise water spillage may
occur.
Cleaning & Maintenance
1. Remove the plug from wall outlet and let the appliance completely cool
down before cleaning.
2. Do not immerse power cord, kettle and Power Base in water.
3. In order to maintain the polish of the outer surface, do not use abrasive
cleaner to wipe the housing.
4. Periodical descaling is needed. The interval of descaling depends on the
hardness of water in your living area and the frequency your using the
kettle.
5. Do not attempt to dismantle the kettle or power base. No user serviceable
parts inside it. For any problem, contact the authorized service facility for
help.
6. The power cord can be rounded around the bottom of power base for
storage.
Environment friendly disposal
You can help protect the environment!
Please remember to respect the local regulations: hand in the
non-working electrical
equipments to an appropriate waste disposal center.
2
Caution: the filled water level must be between the Max and Min level as
indicated on the housing. Too less water will do damage to the heat
element and if the water is overfilled, boiling water may be ejected.
2. Replace the kettle on the Power Base and connect to power supply.
Position the kettle so that the spout of kettle is facing away from you.
Содержание RM/225
Страница 4: ......
