Ramsey Electronics STC1, Инструкция по эксплуатации

Страница: 8 / 28

STC1
•
8
RAMSEY STC1 PARTS LIST
Semiconductors
2 LF347 Quad Op-Amps (U1,2)
1 74HC74 Dual type ‘D’ flip-flops (U6)
2 MAX291 8th order Butterworth Switched Capacitor Filters (U3,5)
6 1N4148 small signal diodes (small glass body with black stripe)
(D1,2,3,4,6,8)
1 4.9 to 5.1 volt zener diode (small black or grey body with stripe on one
end)
(D5)
2 7805 three terminal regulators (marked 78L05) (VR1,2)
1 2N3904 NPN transistor (Q1)
2 LEDs (D7,9)
Resistors
1 100 ohm resistor (brown-black-brown) (R47)
5 270 ohm resistors (red-violet-brown) (R40,56,57,60,61)
8 1K ohm resistors (brown-black-red) (R19,43,44,46,48,50,51,54)
4 1.8K ohm resistors (brown-gray-red) (R11,12,36,37)
2 2.2K ohm resistors (red-red-red) (R18,27)
4 3.3K ohm resistors (orange-orange-red) (R8,9,31,32)
6 4.7K ohm resistors (yellow-violet-red) (R28,35,38,39,63,64)
12 10K ohm resistors (brown-black-orange) (R4,5,7,15,24,25,26,30,41,
42,52,53)
8 15K ohm resistors (brown-green-orange) (R1,2,14,17,20,21,29,34)
6 47K ohm resistors (yellow-violet-orange) (R3,16,22,33,55,59)
1 100K ohm resistor (brown-black-yellow) (R45)
2 4.7M ohm resistors (yellow-violet-green) (R58,62)