Ramsey Electronics SR-1, Инструкция по эксплуатации

Страница: 18 / 22

SR-1 – 18
battery will give very satisfactory service.
THE RAMSEY ELECTRONICS CASE, KNOB & HARDWARE OPTION
Your finished receiver can be installed in a variety of enclosures of your own
design and choosing. You might be planning to combine several Ramsey
circuit kit boards in a single enclosure. Use of the inexpensive and attractive
Ramsey case and knob kit will give your unit that finished look and increase its
resale value. These sturdy black instrument cases are supplied with neatly
lettered front and rear panels, knobs, rubber feet and mounting screws.
OTHER ENCLOSURE RECOMMENDATIONS
While we believe that the Ramsey enclosure and knob option is a fine value
for finishing off your Ramsey receiver or transmitter, we are happy to give you
a couple of additional suggestions and our reasons for them. If your first goal
is economy and rugged portability, you will find that the circuit board can be
mounted nicely in a standard VHS videotape storage box, which also gives
room for a speaker, or earphone storage, and even a roll of antenna wire. The
controls are easily mounted at one end of such a box. It may be necessary to
cut away the molded posts which secure the tape cassette itself. These
storage boxes come in several styles, so pick one which looks truly practical
as a project enclosure.
To accomplish RF shielding, the most economical metal enclosure nicely
suited for Ramsey kit boards is Radio Shack No. 270-253A. This metal utility
cabinet can accommodate both a receiver and our AA-7 Active Antenna, plus
speaker, with room for various refinements you might like to add, such as
power supply or larger battery pack, etc.