Ramsey Electronics CW-700, Руководство пользователя

Страница: 5 / 27

CW700
•
5
There is nothing better than using equipment that you have constructed
yourself, and a nice looking keyer can be a great addition to any station.
•
And you want it to be mechanically durable, so it can be used reliably
when and where you want to, for years to come.
Our directions are designed to help you accomplish these goals. Please
follow them carefully!
TAKING A LOOK AT THE CW700 MICRO MEMORY KEYER
Let’s take a good look at the CW700 for a moment. Your new keyer is a fully
functional iambic keyer that is controlled by a small micro computer IC chip
supplied with the kit. You may notice that the PC board is divided into three
parts. These parts are, the main board, the front control board and the
paddles. It must be noted that our directions are VERY important to help you
join these boards together correctly.
The main board is a conventional board that connects most of the
components. The on-board computer, battery, speaker and jacks are all
mounted on this board.
The front board contains all of the necessary holes and connections for the
controls that you will see on the front of the unit. You may note the many
contacts, or pads, that interface it with the main control board.
The portion of the board consisting of the paddles will become touch
sensitive keys in only a few short steps. We will show you how to adjust
their sensitivity to ensure you the most satisfaction and enjoyment.
Our specially designed case has been prepared to make your project look
it’s best. The case will fit in with most any ham station.
We have supplied you with all of the electrical components necessary to
complete the kit. This includes the onboard computer. The only thing that
you must supply is a nine volt battery, and of course some effort in putting it
together!