Ramset warrants that new T3SS and
T3 Magazine systems power fastening
tools, parts and accessories will be
free from defects in material and
workmanship for the period shown
below.
TWO-YEAR/50,000 SHOT WARRANTY
A two-year/50,000 shot warranty, which
ever comes first, will apply to all parts,
except those listed below as normal
wearing parts, or parts which are
specifically covered by an extended
warranty.
SIX-MONTH/10,000 SHOT WARRANTY
A six-month/10,000 shot warranty applies
to the following parts, which are considered
normal wearing parts:
• Bumper
• Piston Assembly
• O-Rings
• Piston Rings
The warranty period is based off of tool
build date, determined from the tool serial
number. Ramset may extend the warranty
time frame from the date of purchase with
a qualifying document proving date of
purchase.
WARRANTY STATEMENT
Ramset’s sole liability hereunder will be
to replace any part or accessory which
proves to be defective within the specific
time period. Any replacement part or
accessory provided in accordance with
this warranty will carry a warranty for the
balance of the period of warranty applicable
to the part it replaces. This warranty does
not apply to part replacement required due
to normal wear.
This warranty is void as to any tool which
has been subjected to misuse, abuse,
accidental or intentional damage, use with
fasteners, fuel, battery, or battery chargers
not meeting Ramset specification, size, or
quality, improperly maintained, repaired
with other than genuine T3 replacement
parts, damaged in transit or handling, or
which, in Ramset’s opinion, has been altered
or repaired in a way that affects or detracts
from the performance of the tool.
Ramset MAKES NO WARRANTY,
EXPRESSED OR IMPLIED, RELATING
TO MERCHANTABILITY, FITNESS, OR
OTHERWISE, EXCEPT AS STATED ABOVE
and the liability AS STATED ABOVE AND
AS ASSUMED ABOVE is in lieu of all other
warranties arising out of, or in connection
with, the use and performance of the tool,
except to the extent otherwise provided by
applicable law.
Ramset SHALL IN NO EVENT BE
LIABLE FOR ANY DIRECT, INDIRECT, OR
CONSEQUENTIAL DAMAGES, INCLUDING,
BUT NOT LIMITED TO DAMAGES WHICH
MAY ARISE FROM LOSS OF ANTICIPATED
PROFITS OR PRODUCTION, SPOILAGE
OF MATERIALS, INCREASED COST OF
OPERATION OR OTHERWISE.
Ramset reserves the right to change
specifications, equipment, or designs
at any time without notice and without
incurring obligation.
WARRANTY
WARRANTY
21
RAMSET GAS TOOL SYSTEMS WARRANTY AND LIMITATIONS
