FAILURE TO FOLLOW
INSTRUCTIONS CAN
CAUSE INJURY TO THE
TOOL OPERATOR OR
TO BYSTANDERS.
• Use the tool only in well ventilated
areas.
• Always hold the tool at right angles
to the work surface.
• Never attempt to make a fastening
at an angle to the work surface.
• While the tool can be used in any
position (floor, wall or ceiling) it is
important to have both the nose of
the tool and support foot in contact
with the work surface to minimize
spall and make the best quality
fastenings.
• Never put your hand over the nose
end of the tool.
• Never put your hand on or over the
end of the tool to close the tool.
• Never carry the tool with your finger
on the trigger.
• Never leave the tool unattended or
allow anyone to operate it without
first being trained.
• Never engage in horseplay with
the tool.
• Always keep the tool pointed away
from yourself or others.
• Never operate the tool if explosive
or flammable materials are nearby.
• Keep the tool and supplies locked
up and out of the reach of children.
90
°
The T2 tool may be used in
any position.
DANGER
SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
DANGER
7
Keep tool locked up and
out of reach of children
Ceilings
Walls
Floors
Keep both the nose of the tool
and support foot in contact with
the work surface and hold tool
perpendicular to the work surface.
