manualshive.com logo in svg

RAMSET RAM 5500, Инструкция по эксплуатации

Поделиться
Скачать
RAMSET RAM 5500 Скачать руководство пользователя страница 2

1

RAM 100 • 1000 • 5500

RAMSET

www.ramsetinc.com

Important Safety Requirements & Instructions ...................................................................................1
Responsibilities of Installers and Technicians ....................................................................................2
Important Safety Requirements by UL Standards ..............................................................................3
Classes of Vehicular Gate Operators .................................................................................................4
General Specifications........................................................................................................................5
RAM 100 Installation Specifications ...................................................................................................6
RAM 100 Front Installation/ Foot Pedal Release ...............................................................................7
RAM 1000/ RAM 5500 Installation Specifications ..............................................................................8
RAM 1000/ RAM 5500 Types of Installations .....................................................................................9
Loop Sensor Installation/ Gate Travel Adjustment ...........................................................................10
Pushbutton Controls & Master/Slave Installation .............................................................................11
Dip Switch Configuration ............................................................................................................ 12-13
Terminal Strip Connections ........................................................................................................ 14-15
Ramset “Intelligate” Control Board ...................................................................................................16
Wire Board Connections...................................................................................................................17
RAM 100 Parts Diagram...................................................................................................................18
RAM 1000/ RAM 5500 Parts Diagram..............................................................................................19
Bill of Materials ........................................................................................................................... 20-21
Gate Entrance Safety Precautions ...................................................................................................22
Important Information for the Homeowner ........................................................................................23
Troubleshooting Table ......................................................................................................................24

TABLE OF CONTENTS

Do not install this gate operator if you do not have experience or appropriate 

training with gate operators.

WARNING

IMPORTANT SAFETY REQUIREMENTS & INSTRUCTIONS

 WARNING  To reduce the risk of injury or death:

1.  READ AND FOLLOW ALL INSTRUCTIONS. 

2.  Never let children operate or play with gate controls. 

Keep the remote control away from children. 

3.  Always keep people and objects away from the gate. 

NO ONE SHOULD CROSS THE PATH OF THE MOVING 
GATE.

4.  Test the Vehicular Gate Operator monthly. The gate 

MUST reverse on contact with a rigid object or stop 

when an object activates the non-contact sensors. 

After adjusting the limit of travel, retest the Vehicular 

Gate Operator. Failure to adjust and retest the 

Vehicular Gate Operator properly can increase the 

risk of injury or death. 

5.  Use the Emergency Release only when power switch 

or circuit breaker has been turned off. Using the Emer-

gency Release during a power failure can be a hazard 

if power is abruptly restored.

6.  KEEP GATES PROPERLY MAINTAINED. Read the 

Owner’s Manual. Have a qualified service person 

make repairs to gate hardware. 

7.  The entrance is for vehicles only. Pedestrians must 

use separate entrance. 

8.  SAVE THESE INSTRUCTIONS.

Содержание RAM 5500



























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды