RAMSET M CLASS, Руководство пользователя

Страница: 11 / 12

14
CLEANINg
rEpAIr
• NOTE: Acids, alkalis and solvents can corrode the vacuum cleaner parts.
• Clean the container and accessories with water.
• Wipe the top section with a damp cloth.
• Allow the container and accessories to dry
DANgEr: Inappropriately repaired vacuum cleaners present a danger to the operator. Have
repairs carried out by
The Ramset National Service Centre using
only genuine spare parts.
TrANsporT
• Insert the closing plug of the vacuum cleaner into the suction aperture.
• The motor head must be securely fixed to the container (close the latches).
• Place the accessories in a suitable plastic bag and seal the plastic bag or place it in the tool
storage compartment.
• Plug the ends of the suction hose into each other.
• Place the hose around the vacuum cleaner and clamp onto the handle.
fIrsT AID IN THE EvENT of A fAuLT
fault possible cause remedy
Reduction in suction Filter contaminated Clean.
Paper filter full Change.
Container full Empty.
Nozzle, pipes or hose blocked Clean.
Vacuum cleaner will not start Mains plug plugged in?
Mains power missing?
Mains cable OK?
Cover closed properly?
Water sensor switched off?
Vacuum cleaner in readiness for
operation >AC<?
Set to >I< or >A< .
The vacuum cleaner does not
start when the tool is switched on
in the >AC< mode Is the mains plug of the unit in the
plug socket? Put the mains plug in the vacuum
cleaner plug socket
Solenoid valve of compressed air
automatic switch-on contaminated? Flush the compressed air automatic
switch-on with alcohol
PE emptying and disposal bag is
sucked against the filter
Position of rotary slider incorrect
Set rotary slider to be changed to
position. "Open or Closed"
Vacuum cleaner classes M: with
inserted paper filter dust in filter
Position of rotary slider incorrect
Do not take any other action and contact
T
he
Ramset National Service Centre
.
Set rotary slider to be changed to
position. "Open or Closed"