Ramset warrants that new GypFast Air and
Air HD systems power fastening tools, parts and
accessories will be free from defects in material
and workmanship for the period shown below .
TWO-YEAR WARRANTY
A two-year warranty will apply to all parts, except
those listed below as normal wearing parts, or parts
which are specifically covered by an extended
warranty .
SIX-MONTH WARRANTY
A six-month warranty applies to the following
parts, which are considered normal wearing parts:
• Bumper
• Piston Assembly
• O-Rings
• Piston Rings
The warranty period is based off of tool build date,
determined from the tool serial number . Ramset
may extend the warranty time frame from the date
of purchase with a qualifying document proving
date of purchase .
WARRANTY STATEMENT
Ramset’s sole liability hereunder will be to
replace any part or accessory which proves
to be defective within the specific time period .
Any replacement part or accessory provided
in accordance with this warranty will carry a
warranty for the balance of the period of warranty
applicable to the part it replaces . This warranty
does not apply to part replacement required due
to normal wear .
This warranty is void as to any tool which has
been subjected to misuse, abuse, accidental
or intentional damage, use with fasteners not
meeting Ramset specification, size, or quality,
improperly maintained, repaired with other than
genuine GypFast Air and Air HD replacement
parts, damaged in transit or handling, or which,
in Ramset’s opinion, has been altered or
repaired in a way that affects or detracts from
the performance of the tool .
Ramset MAKES NO WARRANTY, EXPRESSED
OR IMPLIED, RELATING TO MERCHANTABILITY,
FITNESS, OR OTHERWISE, EXCEPT AS STATED
ABOVE and the liability AS STATED ABOVE
AND AS ASSUMED ABOVE is in lieu of all other
warranties arising out of, or in connection with,
the use and performance of the tool, except to
the extent otherwise provided by applicable law .
Ramset SHALL IN NO EVENT BE LIABLE FOR
ANY DIRECT, INDIRECT, OR CONSEQUENTIAL
DAMAGES, INCLUDING, BUT NOT LIMITED TO
DAMAGES WHICH MAY ARISE FROM LOSS
OF ANTICIPATED PROFITS OR PRODUCTION,
SPOILAGE OF MATERIALS, INCREASED COST
OF OPERATION OR OTHERWISE .
Ramset reserves the right to change specifications,
equipment, or designs at any time without notice
and without incurring obligation .
WARRANTY
WARRANTY
7
RAMSET AIR TOOL SYSTEMS WARRANTY AND LIMITATIONS
