15
III OPERATION
LIFT ARM SUPPORT DEVICE
Your Mini-Skid is equipped with a lift
arm support device. This is bolted on
the right side of the Mini-skid under the
front cover as in Figure 21.
Note:
To
remove lift arm support device there is a
nut on the underside of the frame.
In order to safely work underneath the
lift arms remove the support device from
the leveling arm and remove any
attachment from the Mini-Skid. Raise
the lift arms to their maximum extension
and place the support device onto the lift
cylinder of the Mini-Skid as in Figure
22. Lock the support in place using the
bolt that attached it to the frame.
Ensure the machine is shut off before
performing any work on the Mini-Skid.
After completing work on the Mini-Skid
remove the support device from the lift
cylinder and replace it on the leveling
arm.
Figure 21
Important
Never Lower The Lift Arms With The
Support Device In Place. Damage To
The Lift Cylinder Will Result.
WARNING
Before Performing Any Work
Underneath The Mini Lift Arms Remove
Any Attachment And Raise The Lift Arm
To Full Height. Use The Lift Arm
Support To Lock The Arms In The
Raised Position
Figure 22
