Rear Bow
View from Inside Top
Wrap flaps around door frames and
attach hook strips to loop strips.
Front
Snap to bow
Step 4
Step 5
Step 6
Step 7
Install the tension strap through the loop on the
strap sewn into the top. Pull tight and secure
with hook and loop.
NOTE: If the straps are damaged or missing
from your vehicle use the included hardware to
replace it.
NOTE: Do not over tighten the strap as it may
damage the loop or the strap.
Snap the top to the bow. Be sure to wrap the
outer flaps around the front of the bow and the
center from the rear.
NOTE: If the studs are missing from the bow
use the included snaps to replace them.
Page 2
Loop straps through and
tighten.
Main skin
A
B
C
A) Fold back the corner of the main skin where the
side window needs to be inserted into the channel.
B) Insert the side window bead into the channel.
NOTE: Be careful not to let the side panel hook on
the sheet metal of the channel, it may rip the top if
forced.
C) Once the side panel is inserted all the way, start
the zipper at the front corner and zip to the rear.
D) Now snap the snaps along the lower edge of the
side panel.
D
