Windshield
Snap
Slip plastic strip i
nto retainer
Rear Bow
View from inside vehicle
Make sure that the straps sewn into the rear of the
top are behind the rear bow.
Getting started:
IMPORTANT: You should first try to pick a warm day above 70 degrees to install the top. Remove it from the box and lay it out in the
sun on a soft surface to allow it to soften up and be more flexible during installation.
RAMPAGE
P
R
O
D
U
C
T
S
Included:
Replacement top panels
2 x 10-24 screw
Strap set
2 x 10-24 nut
5 x Snaps
Hook & loop strips
Tools required:
3/32” drill bit
Philips screw driver
7/32” drill bit
Drill body
Step 2
Step 3
Step 1
Lay the main skin out on the vehicle and insert the plastic strip into
the channel over the front windshield. Now snap the front two snaps.
Open the hook and loop flap on the sides over the front doors
Straps behind bow
Installation
985xx Replacement Top with Zip
Out Rear panels for:
86-94 Suzuki Samurai
Page 1
Drape the top over the rear bow and be sure to tuck the
bow up into the rear corners as far as possible.
