A+F
Front
leg with holes for spindle
Tělo vřetene
Spindle "body"
B1
C
Vice jaw
Spindle with guide rods
B2
A+F
A+F
Back
leg without holes for spindle
Before screwing of vice jaws
,
be sure that jaw
is
parallel with worktop .
Hint:
Tighten jaws using spindles. Align jaws with bench top and then use
B2 screws
for attaching jaw to spindles.
Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.cz
