RAMFAN ATEX, Инструкция по эксплуатации

Страница: 9 / 16

9
1. Completely uncoil power extension cable as to be used between AC power source and
electrical device.
Inspect cable and connectors for damage or wear that could render the cable unsafe for
hazardous locations.
Route cable to avoid contact with heavy machinery that could possible damage cable or
possible be a trip hazard for workers. Cables must be integrated into a system in a way to
support accessibility for regular maintenance.
2. Connect plug end of the power extension cable to the AC power source.
3. Verify AC power source is providing an electrical ground connection.
4. Verify electrical device is turned OFF before attaching power extension cable.
5. Connect coupler end of cable to the electrical device.
Note: For ATX connectors lift dust covers and insert plug into coupler until coupler dust
cap latches snaps into position on plug. To break connection between coupler and plug lift
dust cap to pull connectors apart.
Note: For CEAG connectors lift dust cover, insert plug into coupler, and rotate clockwise, to
lock plug into coupler and to close power switch within the coupler. To break connection
between coupler and plug lift dust cap and rotate plug counter-clockwise to pull connectors
apart.
Note: For R.STAHL connectors insert plug into coupler and rotate outer ring clockwise to
secure plug to coupler.
See illustrations.
Installation Instruction and Care