Ramén Valves AB
l Fredsforsstigen 22 A, SE-168 67 BROMMA, Sweden
Office: +46 8 598 931 00 l E-mail: [email protected] | www.ramenvalves.com
6
The actual position of the ball sector can be defined on the lower shaft end, opposite to the actuator:
Seat holding ring, (item 2)
with seat, (item 10)
shaft (item 5) with
indication groove
Valve body, (item 1)
Open
Closed
The
valve’s performance is equal regardless of flow direction. Although it is recommended that the
valve is mounted according to the flow direction arrow.
IMPORTANT!
Install the valve in such position that injury on person, or damage on property, is
avoided in case of leakage from sealing or flange joints. Also, make sure that, in case of
leakage, inflammable media do not come in contact with electrical components or hot
surfaces which can cause fire or damage on property.
Valve position indication
Flow direction
Seat holding ring, (item
2) with seat, (item10)
Shaft (item 5)
with indication
groove
Valve body, (item 1)
Open
Closed
