Ramblewood Green GC1-28N, Руководство пользователя

Страница: 20 / 20

(Figure 2).
 Take out the adopter pin & flip it, such that the spring faces outward (Figure 3).
 Screw the adopter pin back into top cover assembly. Then put the top cover back
onto the regulator (Figure 4).
 Please insure to screw the top cover back on very tight to make good seal. Apply
sealant when needed.
NOTE: Conversion is operated on top cover assembly only.
DO NOT adjusts the regulator valve body to alter factory setting.
5. Warning:
 Regulator valve outlet pressure is set at the factory; please do not temper its setting /
structure.
 Under all circumstances please have licensed plumber / technician to support the
installation

If you find an abnormality of the regulator valve, stop use it and contact your dealer.
 Do not attempt to modify this pressure regulator without consensus from
Ramblewood Green.
Contact in America
Ramblewood Green
Email:sales@ramblewoodhk.com
Toll free number 1-888-880-8351.
20