Ramblewood Green EC2-27, Руководство пользователя

Страница: 11 / 11

For connection using a 220V plug:
 Connect the hot and neutral wires from the unit to the hot leads/prong on the
220V plug and the ground wire to the neutral lead/prong with the green
paint.
 Connect the black and red wires from the junction box to the hot leads on the
220V faceplate, and the white wire to the neutral lead with green paint.
 Fasten the ground wire coming in from the circuit box (in junction box) to the
ground lead on the junction box.
 Again, note that the hot and neutral wires from the induction unit are used as
both hot lines and must be connected with the two hot leads/prong on the
220V plug.
We have attached sample pictures of 220V plug and face-plate at the end of the
manual posted in;
http://ramblewoodgreen.com/upload/220%20V_wiring-28-7-15_less-photo.pdf
or
http://ramblewoodgreen.com/upload/220%20V_wiring-28-7-15_less-photo_copy1.
pdf
Thank you and please contact us if you have any questions.
DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF.