RAMANNA 10X20, Инструкция по эксплуатации и обслуживанию, Страница: 9 / 18

9
For Ball type machine

After unloading and erection of the machine at workplace, lift the magnetic slide
to remove the cylindrical rods (placed to avoid surface contact) and replace them
with ball strips sent along with the machine.

Do this for both the guide ways and place the magnetic slide down.
Electric Connection
All our machines use 3 phase motors. Make the connections to the starter and you are
ready to use the machine. Make sure the grinding wheel is rotation clockwise, if not
reverse the connections.
If coolant is along with the machine provide separate 3 phase connections to it.